
Select the "
"
or "
"
mode to quickly defrost or remove moisture from the windshield and front side windows
in the Subaru Ascent.
NOTE
- When either defrost mode is selected in the Subaru Ascent, the air conditioning
system may activate automatically to improve defogging performance, even if
the A/C indicator is not illuminated.
In addition, the system will automatically switch to outside air mode to enhance moisture removal and maintain clear visibility.
This behavior is normal and ensures faster and more effective windshield clearing.
- After using the defroster function, pressing the defroster button again will return the Subaru Ascent climate system to its previous settings.
Related manual topics
Welcome screen
When the door is unlocked and the
driver's door is opened, the welcome
screen will appear for a short time.
NOTE
The welcome screen will disappear
when the ignition switch is turned to
the "ON" position while the welcome
screen is displayed.
If any of the doors (including the
re ...
Dtc p0605 internal control module read only memory (rom) error
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0605 INTERNAL CONTROL MODULE READ ONLY MEMORY (ROM) ERRORNOTE:For the diagnostic procedure, refer to DTC P0606. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0606 CONTROL MODULE PROCESSOR ...
Inspection
GLASS/WINDOWS/MIRRORS > Wiper Deicer SystemINSPECTION1. CHECK SYSTEMNOTE:• The wiper deicer does not operate when the ambient temperature becomes 5°C (41°F) or more.• The wiper deicer operates with the rear window defogger at the same time.• It is possible ...