The Subaru Ascent is primarily engineered as a passenger-focused vehicle, designed to deliver comfort, safety, and everyday usability. However, when towing a trailer, additional mechanical stress is placed on key components such as the engine, drivetrain, braking system, tires, and suspension. This increased load can also lead to higher fuel consumption and changes in overall vehicle dynamics.
If you choose to tow with your Subaru Ascent, achieving safe and reliable performance depends on the correct selection of towing equipment and a responsible driving approach. Proper preparation and awareness are essential for maintaining stability and control while towing.
When driving the Subaru Ascent with a trailer attached, always adjust your driving style and carefully evaluate the following factors.
- Road surface conditions
- Weather and visibility
- Total vehicle load weight
- Trailer weight and load distribution
It is strongly recommended to consult an authorized SUBARU dealer when selecting a trailer hitch and related towing accessories for your Subaru Ascent. Always use genuine SUBARU towing equipment or approved components specifically designed for compatibility with your vehicle.
Additionally, strictly follow all installation and operational guidelines provided by the trailer or caravan manufacturer to ensure proper setup and safe usage.
SUBARU does not assume responsibility for any injuries or damage resulting from the use of non-approved towing equipment, incorrect installation, or failure to adhere to recommended towing procedures for the Subaru Ascent.
Before each towing operation, inspect the hitch assembly thoroughly. Ensure that all mounting bolts, nuts, and fasteners are properly tightened and secure.
Warranties and maintenance
Any damage or malfunction of the Subaru Ascent caused by towing a trailer is not covered under standard SUBARU warranties. Because towing places additional strain on the vehicle, more frequent inspections and maintenance are required to maintain optimal performance and safety.
Refer to the section "Maintenance schedule under severe driving conditions" in the Warranty and Maintenance Booklet for detailed service intervals applicable to towing usage.
It is also important to note that towing should be avoided during the initial break-in period of your Subaru Ascent. Do not tow a trailer with a new vehicle or with newly installed powertrain components—including the engine, transmission, differential, or wheel bearings—until at least 1,000 miles (1,600 km) have been driven.
Additional note: When properly equipped and operated within specified limits, the Subaru Ascent can handle towing tasks effectively. However, maintaining safe speeds, ensuring correct load distribution, and performing regular checks are critical to preserving vehicle reliability and ensuring безопасное движение при буксировке.
Related manual topics
SXM setting
1. An option menu screen is displayed
when you touch the tab on the
lower
left side of the screen. The "Options"
screen will appear.
Option menu screen
No.
Function
1
Set the lock function of each channel.
Input the password is necessary
for operation.
...
Inspection
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > General DescriptionINSPECTION1. BASIC INSPECTIONBefore performing diagnosis, check the following items that might provoke the problems related to BSD/RCTA.1. Check the battery. Battery">2. Check the relay and fuse condition. ...
SRS side airbag and SRS curtain airbag
SRS side airbag
The Subaru Ascent is equipped with advanced SRS side airbags that are strategically
integrated into the outer side of each front seatback. These airbags are clearly
identified by an "SRS AIRBAG" label, ensuring easy recognition of their deployment
zones.
In the ...