Independent manual library

Know your Ascent.
Drive prepared.

Clear routes into the owner's manual, current-model context and practical references for everyday ownership.

Subaru Ascent reference

Subaru Ascent 2018-2026 Owner's Manual: Trailer towing tips

CAUTION

  • On Subaru Ascent models equipped with BSD (Blind Spot Detection) and RCTA (Rear Cross Traffic Alert), it is recommended to deactivate the "Rear Vehicle Detection (BSD/RCTA)" function when towing a trailer. The presence of the trailer may interfere with radar signals, reducing system accuracy. For instructions, refer to the "Car settings" menu.
  • If your Subaru Ascent is equipped with the Reverse Automatic Braking (RAB) system, consult your SUBARU dealer before towing, as additional considerations may apply.
  • Operating the Subaru Ascent with a trailer in hot weather or on extended uphill routes may increase the risk of engine or transmission overheating.
  • When towing, the Subaru Ascent will respond differently compared to normal driving conditions. Steering precision, braking efficiency, and stopping distances are all affected. Always drive conservatively and avoid excessive speeds. Follow the guidelines below for safe towing.
  • When parking on steep inclines with a trailer attached to the Subaru Ascent, be aware that the electronic parking brake alone may not provide sufficient holding force. Additional precautions should be taken.

Before starting out on a trip

  • Review all applicable towing laws and regulations for your region before operating the Subaru Ascent with a trailer. Non-compliance may result in legal penalties and insurance complications.
  • Inspect the Subaru Ascent and all hitch components thoroughly. If any defects or abnormalities are found, do not proceed with towing.
  • Ensure that the vehicle maintains a level stance when the trailer is attached. If the Subaru Ascent appears excessively tilted, re-evaluate trailer weight, tongue load, and load distribution.
  • Verify that tire specifications and pressures for both the Subaru Ascent and the trailer meet recommended values.
  • Confirm that all connections are secure:
    • The trailer coupler is firmly attached to the hitch ball.
    • The trailer electrical connector is properly installed, and all lighting functions (brake lights and turn signals) operate correctly.
    • Safety chains are securely fastened.
    • All cargo within the trailer is tightly secured.
    • The side mirrors provide sufficient rearward visibility without excessive blind spots.
  • Before embarking on a long journey, practice maneuvering the Subaru Ascent with the trailer in a safe, open area. Familiarize yourself with braking, turning, and reversing characteristics.

Driving with a trailer

  • When towing with the Subaru Ascent, always allow a significantly longer stopping distance.

    Avoid sudden braking, as it may cause trailer sway, skidding, or jackknifing.

  • Steer smoothly and avoid abrupt turns or sudden lane changes.
  • Reduce speed before entering turns. Due to the trailer tracking closer to the inside of the turn, a wider turning radius is necessary to avoid contact with obstacles or the vehicle itself.
  • Be mindful of crosswinds, which can destabilize the Subaru Ascent and trailer combination. Strong gusts from weather conditions or passing large vehicles may cause sway. If this occurs, hold the steering wheel firmly and gradually reduce speed.
  • Allow additional space when overtaking other vehicles, as the combined length and weight of the Subaru Ascent and trailer require more distance.
  • Reversing with a trailer requires skill and patience.

    Avoid rapid acceleration or steering inputs, and control the steering wheel carefully—preferably from the bottom position—to maintain precision.

Subaru Ascent trailer reversing maneuver illustration

To reverse around a corner, follow these steps carefully.

1. Begin reversing slowly and turn the steering wheel in the opposite direction of the intended trailer movement.

2. Once the trailer starts pivoting, straighten the steering wheel to stabilize alignment.

3. Then steer in the opposite direction to guide the trailer’s trajectory.

4. Continue adjusting until the Subaru Ascent and trailer are aligned, then center the steering wheel.

  • If the ABS warning light activates while towing, stop immediately and have the Subaru Ascent inspected by a qualified SUBARU dealer before continuing.

Driving on grades

  • Before descending steep slopes, reduce speed and shift into a lower gear to utilize engine braking. This helps prevent excessive brake wear and overheating. Avoid abrupt downshifting.
  • During uphill driving in hot weather, the air conditioning system of the Subaru Ascent may temporarily deactivate to protect engine components from overheating.
  • Monitor critical indicators when climbing inclines, especially in high temperatures, as both engine and transmission are under increased load.

Temperature gauge

Subaru Ascent temperature gauge warning indicator AT OIL TEMP warning light

Subaru Ascent rear differential temperature warning light Rear differential oil temperature warning light (if equipped)

If any of the following warning signs appear, immediately switch off the air conditioner and safely stop the Subaru Ascent at the nearest suitable location. Refer to the appropriate emergency procedures.

  • "If you park your vehicle in case of an emergency"
  • "Engine overheating"
  • The temperature gauge approaching the overheating zone
  • Illumination of the AT OIL TEMP warning light
  • Activation of the rear differential oil temperature warning light (if equipped)
  • Do not use the accelerator to hold the Subaru Ascent stationary on an incline. Instead, apply the foot brake or parking brake to prevent overheating of transmission components.

Parking on a grade

When parking the Subaru Ascent with a trailer, always secure both the vehicle and trailer wheels using wheel chocks. Firmly engage the parking brake. Avoid parking on slopes whenever possible.

If parking on an incline is unavoidable, follow this procedure:

1. Keep the brake pedal fully depressed.

2. Have another person position wheel chocks under both the Subaru Ascent and trailer wheels.

3. Slowly release the brake pedal until the vehicle weight is supported by the chocks.

4. Reapply the brakes, engage the parking brake, then gradually release the foot brake.

5. Shift the transmission into the "P" position and turn off the engine.

Additional note: Careful preparation and disciplined driving habits are essential when towing with the Subaru Ascent. Following these recommendations enhances safety, improves handling stability, and helps protect both the vehicle and trailer from unnecessary stress.

    Related manual topics

    General description
    Caution CRUISE CONTROL SYSTEM > General DescriptionCAUTION• Before disassembling or reassembling parts, always disconnect the battery ground cable from battery. When replacing the audio, control module and other parts provided with memory functions, record the memory contents before discon ...

    Inspection
    LIGHTING SYSTEM > Headlight SystemINSPECTION1. AUTO HEADLIGHT SYSTEM CHECKSTEPCHECKYESNO1.CHECK HEADLIGHT ILLUMINATION.Set the lighting switch to the switch 1 (TAIL/PARKING) and switch 2 (HEAD).Do the tail and headlight illuminate? Headlight System > INSPECTION">Go to Step 2.Check the ...

    CHECK ENGINE warning light/Malfunction indicator light
    CAUTION If the CHECK ENGINE warning light in your Subaru Ascent turns on while driving, it is essential to have the vehicle inspected and repaired by an authorized SUBARU dealer as soon as possible. Continuing to operate the Subaru Ascent without addressing potential emission control system i ...