SUBARU ASCENT FAMILY SUV WITH STANDARD AWD OWNER'S & SERVICE MANUAL IN A CLEAR WEB FORMAT FIND FAST CONTROLS, X-MODE, TOWING & MAINTENANCE
SUASCENT Subaru Ascent Owner Reference
Independent manual library

Know your Ascent.
Drive prepared.

Find Subaru Ascent manuals, service information, maintenance guidance, vehicle features and practical reference material in one place.

Owner's manual Service manual
260 hp8.7 in clearance5,000 lb towing*
Subaru Ascent reference

Subaru Ascent 2018-2026 Owner's Manual: Fuses

Subaru Ascent 2018-2026 Owner's Manual / Maintenance and service / Fuses

CAUTION

Never replace a blown fuse in your Subaru Ascent with one of a higher rating or with non-approved materials. Doing so may result in serious electrical damage or even fire.

NOTE

Each fuse in your Subaru Ascent is labeled with its rating and corresponding circuit on the inside of the fuse box cover for easy identification.

Fuses are designed to protect the electrical systems of your Subaru Ascent by melting when excessive current flows through a circuit. This prevents damage to wiring and sensitive electronic components.

The Subaru Ascent is equipped with two fuse boxes for convenient access and system protection.

Subaru Ascent interior fuse box location under driver side dashboard

One fuse box is located beneath the instrument panel on the driver’s side. To access it, simply pull off the protective cover.

Subaru Ascent fuse box cover showing spare fuses and fuse puller tools

  1. Spare fuses
  2. Fuse puller

The second fuse box, also known as the main fuse box, is positioned within the engine compartment of your Subaru Ascent. Spare fuses and the fuse puller tool are typically stored inside the fuse box cover for convenience.

When removing the fuse puller, pinch its upper section firmly to release it from its holder.

Subaru Ascent fuse condition comparison good versus blown fuse

  1. Good
  2. Blown

If any electrical components such as lights, accessories, or control systems in your Subaru Ascent stop functioning, inspect the corresponding fuse first. A blown fuse should be replaced promptly.

1. Turn the ignition switch to the "LOCK"/"OFF" position and ensure all electrical systems are turned off.

2. Remove the fuse box cover.

3. Identify the potentially blown fuse by referring to the diagram on the back of the cover.

Subaru Ascent fuse diagram on fuse box cover for circuit identification

4. Use the fuse puller to carefully remove the suspected fuse.

5. Inspect the fuse. If it is blown, replace it with a new fuse of the same rating to restore proper operation.

6. If the replacement fuse blows again shortly after installation, this indicates a deeper electrical issue within your Subaru Ascent.

In such cases, contact your SUBARU dealer for professional diagnosis and repair.

Installation of accessories

Before installing any additional electrical accessories such as fog lights or aftermarket equipment in your Subaru Ascent, always consult your SUBARU dealer.

Improper installation or the use of incompatible components may disrupt the vehicle’s electronic systems and lead to malfunctions or damage.

Proper handling of electrical components in your Subaru Ascent ensures reliability, safety, and long-term performance of all onboard systems.

    Related manual topics

    Jump starting
    WARNING Battery fluid contains highly corrosive SULFURIC ACID. Avoid any contact with eyes, skin, clothing, or painted surfaces of your Subaru Ascent, as it can cause severe injury and damage. If battery fluid comes into contact with your body, immediately rinse the affected area thoro ...

    Electronic Brake Force Distribution (EBD) system
    The Electronic Brake Force Distribution (EBD) system in the Subaru Ascent enhances braking efficiency by dynamically adjusting the distribution of braking force between the front and rear wheels. This optimization depends on factors such as vehicle load, speed, and driving conditions, ensuring ...