The Subaru Ascent is equipped with high-performance LED headlights, which provide significantly greater illumination compared to traditional halogen systems.
When carrying heavy loads, the angle of the headlights may shift upward, potentially causing glare for oncoming drivers. To counteract this, the Subaru Ascent features an automatic headlight beam leveler that continuously adjusts the beam height to maintain optimal illumination and minimize glare.
CAUTION
In certain situations, such as after transporting the Subaru Ascent on a flatbed truck or parking on uneven terrain, the headlights may become misaligned. In such cases, the automatic leveling system may not fully correct the beam angle. It is recommended to have the alignment inspected and adjusted by a SUBARU dealer if necessary.
Related manual topics
Specification
FRONT SUSPENSION > General DescriptionSPECIFICATIONTire sizeP225/55R17225/55R17FrontWheel arch height452 (17.8)(Tolerance: +12 mm −24 mm (+0.47 in −0.94 in))mm (in)Camber (tolerance: ±0°45' Differences between RH and LH: 45' or less)0°10'Caster (referential valu ...
Removal
POWER ASSISTED SYSTEM (POWER STEERING) > Universal JointREMOVAL1. Adjust the tilt position of the column assembly - steering to the lowest position and lock the tilt lever.2. Remove the universal joint assembly - steering.(1) Place alignment marks on the universal joint assembly - steering.NOTE:P ...
Engine
SPECIFICATIONS > CrosstrekENGINEModel2.0 L DOHC non-turboEngine typeHorizontally opposed, liquid cooled, 4-cylinder, 4-stroke gasoline engineValve arrangementDOHCBore ? strokemm (in)84.0 ? 90.0 (3.31 ? 3.54)Displacementcm3 (cu in)1,995 (121.7)Compression ratio10.5Ignition order1 — 3 — 2 — 4 ...