If your Subaru Ascent displays any of the following abnormal screen behaviors, it may indicate a temporary glitch or malfunction within the center information display system.
In many cases, such issues are minor and can be resolved by performing a simple reset procedure. Follow the steps below to attempt recovery of the display functionality in your Subaru Ascent.

Shutting down the screen

Freezing the screen

Blacking out the screen

Error A

Error B
1. Safely park your Subaru Ascent in a secure location away from traffic.
2. Turn the ignition switch to the "LOCK/OFF" position, wait briefly, and then restart the engine to attempt a system reset.

- Volume button
3. If the center information display in your Subaru Ascent does not recover after restarting the engine, press and hold the volume button for more than 10 seconds.
This action will force the system to reboot and may restore normal operation.
4. If the display still does not respond after performing these steps, contact your SUBARU dealer for further diagnostics and repair.
Moonroof (if equipped) - if the moonroof does not close
If the moonroof in your Subaru Ascent fails to close properly, it is recommended to have the system inspected by an authorized SUBARU dealer to prevent further complications or water intrusion.
Related manual topics
Battery
WARNING
Never expose the battery in your Subaru Ascent to open flames or sparks.
The battery emits highly flammable gases that can ignite and cause an
explosion if exposed to ignition sources.
Always wear appropriate eye protection when working near the battery
of your Subaru ...
Power outlets
CAUTION
In the Subaru Ascent, never insert foreign objects into the accessory
power outlet, especially conductive materials such as coins or aluminum foil.
This can result in a short circuit or electrical damage. Always keep the outlet
covered with its cap when not in use.
If the plug ...
