When an unexpected situation occurs and you must stop your Subaru Ascent, always activate the hazard warning flashers to clearly alert other road users, regardless of whether it is day or night.
Whenever possible, avoid stopping directly on the roadway. Instead, carefully maneuver your Subaru Ascent to a safe location off the road to minimize the risk of a collision.
The hazard warning system can be engaged at any time, even if the ignition switch is not in the active position, ensuring that your Subaru Ascent remains visible to surrounding traffic.
To activate the system, press the hazard warning switch once. Press it again to turn the system off after the situation is resolved.
NOTE
While the hazard warning flashers are active, the turn signal function of the Subaru Ascent will be temporarily disabled.
Related manual topics
Pandora(if equipped)
Pandora is an application for a smartphone.
This can automatically select and
play recommended tracks.
By rating the track currently playing, tracks
that better match your preference will be
recommended.
In order to connect to this system, use a
USB port for an iPhone or iPod touch and
...
Electrical specification
AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS) > Control Module I/O SignalELECTRICAL SPECIFICATION1. AUTO HEADLIGHT BEAM LEVELER CMContentTerminal No.Measuring conditionStandardIG power supply1 ←> Chassis groundIgnition switch ON8 — 16 VGND2 ←> Chassis groundAlwaysLess than 1 ...
Removal
DRIVE SHAFT SYSTEM > Propeller ShaftREMOVALCAUTION:• Before removing propeller shaft, wrap metal parts with a cloth or rubber material.• Do not disassemble the center EDJ of the propeller shaft.• Before removing propeller shaft, wrap the metal parts attached to the rubber boot o ...