When parking your Subaru Ascent, it is essential to follow proper procedures to ensure maximum safety and prevent unintended vehicle movement. Always complete the following actions before leaving the vehicle.
- Firmly engage the parking brake to secure the Subaru Ascent.
- Shift the select lever into the "P" (Park) position to lock the transmission.
Never rely solely on the transmission’s internal resistance to hold the Subaru Ascent in place, as this may not provide sufficient stability, especially on slopes.

When parking the Subaru Ascent on an uphill incline, always turn the front wheels away from the curb. This precaution helps prevent the vehicle from rolling into traffic if it begins to move.

When parking facing downhill, turn the front wheels toward the curb so that the Subaru Ascent will roll safely into the curb rather than into the roadway if movement occurs.
WARNING
- Never leave children or pets unattended inside the Subaru Ascent.
They may unintentionally operate vehicle controls or be exposed to dangerous temperatures, especially in hot weather, which can lead to severe injury or death.
- Avoid parking the Subaru Ascent over flammable materials such as dry
grass, paper, or debris.
Hot exhaust components can ignite such materials and create a fire hazard.
- If you intend to rest or sleep inside the Subaru Ascent, always turn
off the engine.
Exhaust gases, including carbon monoxide (CO), may enter the cabin and cause serious harm or fatal poisoning.
CAUTION
- If your Subaru Ascent is equipped with a lower bumper guard or underspoiler,
be cautious when parking near curbs, blocks, or obstacles.
Contact with such objects may damage the lower body components.
- The parking brake alone may not provide sufficient holding force under
extreme conditions, such as parking on steep inclines while towing.
Additional precautions should be taken to secure the Subaru Ascent.
Related manual topics
Front passenger's frontal airbag ON and OFF indicators
Front
passenger's frontal airbag ON
indicator
Front
passenger's frontal airbag OFF
indicator
The front passenger's frontal airbag ON
and OFF indicators show you the status of
the front passenger's SRS frontal airbag.
The indicators are located next to the
clock in the center po ...
Disassembly
CONTROL SYSTEMS > MT Gear Shift LeverDISASSEMBLY1. Remove the lock wires.(A)Lock wire2. Remove the rod from gear shift lever.(A)Rod(B)Lever(C)Stay3. Separate the rod and inner boot.4. Remove the snap ring from the stay.(A)Snap ring5. Separate the gear shift lever and the stay.6. Remove the boot a ...
Dtc u0122 lost communication with vehicle dynamics control module
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0122 LOST COMMUNICATION WITH VEHICLE DYNAMICS CONTROL MODULENOTE:For the diagnostic procedure, refer to LAN section. Basic Diagnostic Procedure">1. OUTLINE OF DIAGNOSISDetect malfunction of CAN commu ...