- Keys
- Keyless access with push-button start system
- Safety precautions
- Locking and unlocking by holding the access key fob
- Unlock using PIN Code Access
- Power saving function
- Disabling keyless access function
- Selecting audible signal operation
- Immobilizer
- Remote keyless entry system
- Door locks
- Locking and unlocking from the outside
- Locking and unlocking from the inside
- Automatic door locking/unlocking
- Key lock-in prevention function
- Battery drainage reduction function
- Alarm system
- Child safety locks
- Windows
- Rear gate
- Moonroof
- Rear door window sunshades
Related manual topics
Turn off display of driving information
display
The driving information display can be
turned off.
To turn off the display, turn the ignition
switch to the "LOCK"/"OFF" position and
press the "+" button adjacent to the clock
display for approximately 5 seconds.
Then, the driving information display and
the clock display will blink for ...
Removal
EXTERIOR BODY PANELS > Front FenderREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the bumper face - front. Front Bumper > REMOVAL">3. Remove the light assembly - head. Headlight Assembly > REMOVAL">4. Remove the cover - front fender.(1) Remove ...
Dtc b2a09 i-call button circuit
TELEMATICS SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2A09 I-CALL BUTTON CIRCUITDiagnosis start condition:When ignition switch is ON.DTC detecting condition:The following conditions occur for at least 50 ms.• i-button impedance is more than 10 k?.&bul ...