The Subaru Ascent is equipped with a Surround View Monitor system that provides a comprehensive visual overview of the vehicle’s surroundings. This system displays real-time camera images on the center information display, helping the driver monitor blind spots and improve situational awareness.
It can be used to observe the front area while driving or starting off, the rear area when reversing, and the entire perimeter when parking the Subaru Ascent.
WARNING
- Never rely solely on the Surround View Monitor when operating the Subaru
Ascent. The displayed image may differ from actual conditions.
Always visually check the surroundings directly and use mirrors in addition to the monitor to avoid accidents.
- Avoid using the Surround View Monitor in the following conditions:
- Driving on rough, snowy, or unpaved roads.
- If any camera component is damaged or malfunctioning.
(e.g., lens or mounting bracket issues).
- When the outside mirrors of the Subaru Ascent are folded.
- If any front door is not completely closed.
- At low temperatures, the display image may become darker or less responsive. Moving objects may appear distorted or temporarily disappear, so always remain alert when driving the Subaru Ascent.
NOTE
If a malfunction occurs in the Surround View Monitor system, an error message will appear on the display. Refer to the center information display troubleshooting section for further guidance.
- How to change the display of Surround View Monitor
- How to cancel Surround View Monitor
- Range of Surround View Monitor
Related manual topics
Front passenger's seatbelt
The front passenger's seatbelt has
shoulder belt and lap belt pretensioner.
Seatbelt retractor assembly (shoulder
belt pretensioner)
Lap belt pretensioner
On the front passenger's side, the
shoulder belt pretensioner is supplemented
by a lap belt pretensioner, which is
located at ...
Basic diagnostic procedure Procedure
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURESTEPCHECKYESNO1.CHECK PRE-INSPECTION.1) Ask the customer when and how the trouble occurred using the interview check list. Check List for Interview">2) Before performing diagnostics, check the following ...
Inspection
SECURITY AND LOCKS > Keyless Access Outdoor AntennaINSPECTION1. Check the setting by performing Keyless access system check using the Subaru Select Monitor. Keyless Access System Check > OPERATION">2. Disconnect the Subaru Select Monitor. While bringing the access key, operate the tou ...