The Subaru Ascent provides audible confirmation (electronic chirps) when locking or unlocking the vehicle. This feature can be customized or disabled through the center information display according to user preference.
Additionally, the volume level of the Subaru Ascent audible signal can be adjusted by an authorized SUBARU dealer.
Selecting hazard warning flasher operation
The Subaru Ascent also uses hazard warning flashers to visually confirm locking and unlocking actions. This function can be turned off or adjusted through the vehicle settings menu or by consulting a SUBARU dealer.
Warning chimes and warning indicator
The Subaru Ascent keyless access with push-button start system is equipped with warning chimes and visual indicators on the instrument cluster. These alerts are designed to prevent improper operation and enhance vehicle security against unauthorized access.
When access key fob does not operate properly
Refer to the Subaru Ascent troubleshooting section for guidance if the access key fob does not function correctly.
Replacing battery of access key fob
Battery replacement procedures for the Subaru Ascent key fob are outlined in the corresponding maintenance section.
Replacing access key fob
For replacement or additional Subaru Ascent key fobs, contact an authorized SUBARU dealer to ensure proper programming and compatibility.
Certification for keyless access with push-button start system
- U.S.-spec. models
FCC ID: HYQ14AKB
FCC ID: Y8PSU19S-3
FCC ID: Y8PSSPIMB02
CAUTION
FCC WARNING
Unauthorized changes or modifications to Subaru Ascent keyless access system components may void the user's authority to operate the equipment.
NOTE
This Subaru Ascent device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) the device may not cause harmful interference, and (2) it must accept any interference received, including interference that may affect performance.
Related manual topics
Procedure
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Learning ControlPROCEDURE1. PREPARATION FOR LEARNING1. Warm up or cool down until the ATF temperature displayed on the Subaru Select Monitor is 40 — 65°C (104 — 149°F).2. After stopping the vehicle, shift the select leve ...
Inspection
GLASS/WINDOWS/MIRRORS > Relay and FuseINSPECTION1. CHECK FUSE1. Remove the fuse and check visually.2. If the fuse is blown out, replace the fuse.2. CHECK RELAY1. Check the resistance between relay terminals.Terminal No.Inspection conditionsSpecificationCircuit1 — 2Always1 M? or more1 — 2Apply ...
Dtc c1424 ecm
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1424 ECMDTC detecting condition:ECM malfunctioningTrouble symptom:• ABS does not operate.• VDC does not operate.• Hill start assist does not operate.STEPCHECKYESNO1.CHECK E ...